How to use the pump room in Blue Prince

First time you unlock the pump room in Blue princeIt can be scary with all pipes and levers. But in order to access certain areas of the house, you must eventually find out how to use the pump room.

With the pump room you can enter another area in the basement, get to the bottom of the underground container and more. Join us when we show how to use all pipes and levers in the pump room.

What does the pump room do?

Before you can learn how to use the pump room, you must first understand Why you need it. The pump room controls the water for Six other areas of the house.

These areas and the effects that the pump room has on them include:

• Fountain: Drop it to access another part of the basement. You can also empty it on a part of picking up all the coins you have thrown into the fountain to make a wish.
• Reservoir: Drop it to access the locked coffins at the bottom.
• Greenhouse: Turns off sprinklers, which causes the special pearl flowers to disappear.
• Kitchen: Turns off the sink, so you can't fill watering can.
• Pool: Drop the pool, which sometimes gives you access to rewards at the bottom.
• Aquarium: Empty the thoughts in the aquarium.

If you buy Swimming trunks from Mount Holly Gift ShopEach time you prepare the pool, there will be two chests in it. You can only access these chests if the pool is emptied.

How to unlock the pump room

The only way to add the pump room to your draft pool for the day is to Elaborate the pool, which also unlocks the sauna and the dressing room. Thankfully, the pool costs only a gem, and then the pump room does not cost anything.

How to use the pump room

When you start moving with the different levers it is important to Understand the capacity of thoughtWhich pipes go to which tank, which pumps you need to use when and how many units of water are in each area.

On the wall next to one of the doors is one Map of the pipes and pumps in the pump roomwhich shows where everyone can empty.

Tank one and two each one has four units eachSo it's about counting how many you need to drain or fill to get the desired result.

To check the water for a specific area, first press The button on the control panel for the one you want.

Then you will find which tube feeds that area. For example, if you empty the pool, you are looking for tube number six. When you look at the chart is Pipe Six controlled by pump four.

With the pool selected on the control panel, move the switch on pump away from you to empty the poolor against you to fill it.

Now, because the pool has nine units and tank one only holds four, to completely empty the pool, you have to Empty the tank in one of the other areass to make room. Follow the same process for the other areas as well.

Because the fountain and reservoir have the most units, as long as you don't need any of these areas, They are good for keeping extra water When you need to empty the pool.

Between thoughts is one and two one lever that you can use to switch between them. This works only for the fountain and the reservoir, as they are entered in both thoughts.

Spare container

The spare tank can be used to keep extra water, make it easier to drain and fill the underground of the reservoir. You must have the boiler room to be opened and connected to the pump room To use the spare tank.

Unlike thoughts one and two, Reserve tank holds six units. The control panel for the spare tank is to the left of the main control panel. On it you see two buttons, one to empty the tank and the other to fill the tank. Just press the button for which action you need.